- Empty cart.
- Continue Shopping
Velp ARE Hot Plate Stirrer
Velp ARE Hot Plate Stirrer
RM1,836.00
Add to cart
ARE Hot Plate Stirrer
Hot plate stirrer widely used in research and development, industrial and university laboratories worldwide.
Easy to Use and to Control
The hot plate stirrer ARE offers an innovative low profile and attractive design for an outstanding comfort.
Also, the inclination of the front panel has been carefully studied to facilitate use.
The control panel is extremely intuitive.
By turning the left knob of the hot plate stirrer it is possible to adjust the temperature (up to 370 °C), whilst the right one controls the stirring speed (up to 1500 rpm).
Aluminum alloy top plate ensures a great temperature homogeneity and optimum heat transfer across the entire surface.
Also, the inclination of the front panel has been carefully studied to facilitate use.
The control panel is extremely intuitive.
By turning the left knob of the hot plate stirrer it is possible to adjust the temperature (up to 370 °C), whilst the right one controls the stirring speed (up to 1500 rpm).
Aluminum alloy top plate ensures a great temperature homogeneity and optimum heat transfer across the entire surface.
Maximum Protection Against Leakages – IP 42
The hot plate stirrer ARE ensures an excellent level of safety and protection for the user.
The elevated control panel is easily accessible, is positioned at a safe distance from sources of heat and is protected against possible damage caused by liquid spills thanks to a dedicated run-off groove.
The pressure die-cast structure is designed so that accidental liquid spills cannot reach the internal parts of the hot plate stirrer.
The elevated control panel is easily accessible, is positioned at a safe distance from sources of heat and is protected against possible damage caused by liquid spills thanks to a dedicated run-off groove.
The pressure die-cast structure is designed so that accidental liquid spills cannot reach the internal parts of the hot plate stirrer.
Clean and safe round bottom flasks to replace oil baths and mantles
The Hemispheric Bowl are the most suitable solution to replace oil baths and mantles in order to perform clean and safe analysis with round bottom flasks.
VELP Hemispheric Bowl precisely fit the 135 mm diameter plate and the flask surface, ensuring the fastest heat transfer.
Increase the productivity with MonoAluBlock™ and MultiAluBlock™
The new MonoAluBlock™and MultiAluBlock™ permits to perform numerous reactions, reducing time and bench space also achieving the highest stirring and heating performances.
- MonoAluBlock™ are the ideal solution for all the application that require to stir multiple vials of the same dimensions
- MultiAluBlock™ consist of small combinable segments in order to accommodate different sizes of vials at the same time. The user can select the most suitable mix for his application
Optional Accessories
TECHNICAL DATA
| CONSTRUCTION MATERIAL: | epoxy painted aluminum structure |
| HEATING PLATE: | aluminum alloy coated with special protection |
| HEATING PLATE DIAMETER: | 135 mm |
| PROTECTION RATING CEI EN 60529: | IP 42 |
| POWER: | 630 W |
| WEIGHT: | 2.6 Kg (5.7 lb) |
| DIMENSIONS (WXHXD): | 165x115x280 mm (6.5×4.5×11 in) |
| ELECTRONIC SPEED CONTROL: | up to 1500 rpm |
| TEMPERATURE REGULATION: | from room temp. to 370°C |
| STIRRING VOLUME (H2O): | up to 15 liters |
| STIRRING SYSTEM: | high-power driving magnet type ”PCM” operated by a mono-phase motor for continuous operation |
| COUNTER-REACTION: | constant speed |
Specification
ARE Hot Plate Stirrer
Hot plate stirrer widely used in research and development, industrial and university laboratories worldwide.
Easy to Use and to Control
The hot plate stirrer ARE offers an innovative low profile and attractive design for an outstanding comfort.
Also, the inclination of the front panel has been carefully studied to facilitate use.
The control panel is extremely intuitive.
By turning the left knob of the hot plate stirrer it is possible to adjust the temperature (up to 370 °C), whilst the right one controls the stirring speed (up to 1500 rpm).
Aluminum alloy top plate ensures a great temperature homogeneity and optimum heat transfer across the entire surface.
Also, the inclination of the front panel has been carefully studied to facilitate use.
The control panel is extremely intuitive.
By turning the left knob of the hot plate stirrer it is possible to adjust the temperature (up to 370 °C), whilst the right one controls the stirring speed (up to 1500 rpm).
Aluminum alloy top plate ensures a great temperature homogeneity and optimum heat transfer across the entire surface.
Maximum Protection Against Leakages – IP 42
The hot plate stirrer ARE ensures an excellent level of safety and protection for the user.
The elevated control panel is easily accessible, is positioned at a safe distance from sources of heat and is protected against possible damage caused by liquid spills thanks to a dedicated run-off groove.
The pressure die-cast structure is designed so that accidental liquid spills cannot reach the internal parts of the hot plate stirrer.
The elevated control panel is easily accessible, is positioned at a safe distance from sources of heat and is protected against possible damage caused by liquid spills thanks to a dedicated run-off groove.
The pressure die-cast structure is designed so that accidental liquid spills cannot reach the internal parts of the hot plate stirrer.
Clean and safe round bottom flasks to replace oil baths and mantles
The Hemispheric Bowl are the most suitable solution to replace oil baths and mantles in order to perform clean and safe analysis with round bottom flasks.
VELP Hemispheric Bowl precisely fit the 135 mm diameter plate and the flask surface, ensuring the fastest heat transfer.
Increase the productivity with MonoAluBlock™ and MultiAluBlock™
The new MonoAluBlock™and MultiAluBlock™ permits to perform numerous reactions, reducing time and bench space also achieving the highest stirring and heating performances.
- MonoAluBlock™ are the ideal solution for all the application that require to stir multiple vials of the same dimensions
- MultiAluBlock™ consist of small combinable segments in order to accommodate different sizes of vials at the same time. The user can select the most suitable mix for his application
Optional Accessories
TECHNICAL DATA
| CONSTRUCTION MATERIAL: | epoxy painted aluminum structure |
| HEATING PLATE: | aluminum alloy coated with special protection |
| HEATING PLATE DIAMETER: | 135 mm |
| PROTECTION RATING CEI EN 60529: | IP 42 |
| POWER: | 630 W |
| WEIGHT: | 2.6 Kg (5.7 lb) |
| DIMENSIONS (WXHXD): | 165x115x280 mm (6.5×4.5×11 in) |
| ELECTRONIC SPEED CONTROL: | up to 1500 rpm |
| TEMPERATURE REGULATION: | from room temp. to 370°C |
| STIRRING VOLUME (H2O): | up to 15 liters |
| STIRRING SYSTEM: | high-power driving magnet type ”PCM” operated by a mono-phase motor for continuous operation |
| COUNTER-REACTION: | constant speed |
Download
ARE Hot Plate Stirrer
Hot plate stirrer widely used in research and development, industrial and university laboratories worldwide.
Easy to Use and to Control
The hot plate stirrer ARE offers an innovative low profile and attractive design for an outstanding comfort.
Also, the inclination of the front panel has been carefully studied to facilitate use.
The control panel is extremely intuitive.
By turning the left knob of the hot plate stirrer it is possible to adjust the temperature (up to 370 °C), whilst the right one controls the stirring speed (up to 1500 rpm).
Aluminum alloy top plate ensures a great temperature homogeneity and optimum heat transfer across the entire surface.
Also, the inclination of the front panel has been carefully studied to facilitate use.
The control panel is extremely intuitive.
By turning the left knob of the hot plate stirrer it is possible to adjust the temperature (up to 370 °C), whilst the right one controls the stirring speed (up to 1500 rpm).
Aluminum alloy top plate ensures a great temperature homogeneity and optimum heat transfer across the entire surface.
Maximum Protection Against Leakages – IP 42
The hot plate stirrer ARE ensures an excellent level of safety and protection for the user.
The elevated control panel is easily accessible, is positioned at a safe distance from sources of heat and is protected against possible damage caused by liquid spills thanks to a dedicated run-off groove.
The pressure die-cast structure is designed so that accidental liquid spills cannot reach the internal parts of the hot plate stirrer.
The elevated control panel is easily accessible, is positioned at a safe distance from sources of heat and is protected against possible damage caused by liquid spills thanks to a dedicated run-off groove.
The pressure die-cast structure is designed so that accidental liquid spills cannot reach the internal parts of the hot plate stirrer.
Clean and safe round bottom flasks to replace oil baths and mantles
The Hemispheric Bowl are the most suitable solution to replace oil baths and mantles in order to perform clean and safe analysis with round bottom flasks.
VELP Hemispheric Bowl precisely fit the 135 mm diameter plate and the flask surface, ensuring the fastest heat transfer.
Increase the productivity with MonoAluBlock™ and MultiAluBlock™
The new MonoAluBlock™and MultiAluBlock™ permits to perform numerous reactions, reducing time and bench space also achieving the highest stirring and heating performances.
- MonoAluBlock™ are the ideal solution for all the application that require to stir multiple vials of the same dimensions
- MultiAluBlock™ consist of small combinable segments in order to accommodate different sizes of vials at the same time. The user can select the most suitable mix for his application
Optional Accessories
TECHNICAL DATA
| CONSTRUCTION MATERIAL: | epoxy painted aluminum structure |
| HEATING PLATE: | aluminum alloy coated with special protection |
| HEATING PLATE DIAMETER: | 135 mm |
| PROTECTION RATING CEI EN 60529: | IP 42 |
| POWER: | 630 W |
| WEIGHT: | 2.6 Kg (5.7 lb) |
| DIMENSIONS (WXHXD): | 165x115x280 mm (6.5×4.5×11 in) |
| ELECTRONIC SPEED CONTROL: | up to 1500 rpm |
| TEMPERATURE REGULATION: | from room temp. to 370°C |
| STIRRING VOLUME (H2O): | up to 15 liters |
| STIRRING SYSTEM: | high-power driving magnet type ”PCM” operated by a mono-phase motor for continuous operation |
| COUNTER-REACTION: | constant speed |
Related products
Laboratory TB1 Portable Turbidimeter
RM7,747.00
Laboratory Cooled Incubator, FOC 120E Connect
RM13,743.00
Laboratory Cooled Incubator, FOC 200E Connect
RM15,686.00
Laboratory Drying Ovens VENTICELL 222
RM21,929.00
Senz TDS 2 (100-10000 ppm)
RM324.00
Laboratroy WalkLAB Digital Dissolved Oxygen Meter with 3 Meter Probe
RM1,170.00 – RM2,201.00
Laboratory Cooled Incubator, FOC 200I Connect
RM18,907.06
ROTAX 6.8 Overhead Mixer
RM24,403.53
Laboratory ECO 6 Thermoraectors, Velp
RM6,450.00
Laboratory WalkLAB Digital Dissolved Oxygen Meter with 1 Meter Probe
RM1,096.00 – RM2,119.00
Laboratory Jar Testing Flocculator, FP4
RM7,139.00
Laboratory Cooled Incubator, FOC 200IL Connect
RM26,543.00
